Fall Arrest Anchors for Beams

Single Point Fall Arrest Anchors

Fixed Beam Anchor An anchorage connector for a personal fall arrest system designed to be attached to an I-beam in a fixed position.

  • Installs in seconds by sliding down the adjustable hook end and locking in place with a pin.
  • Portable and lightweight for easy transportation.
  • Fits beams upto 914mm wide and 65mm thick
  • For horizontal or vertical use.
  • Can be used as an end termination for a horizontal lifeline system.
  • BS EN 795 Class B

Glyder™ 2 Sliding Beam Anchor An anchorage connector for a personal fall arrest system designed to be attached to an I-beam and that can be moved along with the user.

  • Built in ratcheting adjustment system allows rapid installation and removal.
  • Guarded locking mechanism prevents accidental disengagement for ultimate safety.
  • Synthetic wear plates can be replaced and eliminate metal on metal contact, reducing friction for smooth and effortless operation.
  • Extremely low weight and portable at only 1.66kgs.
  • Fits beams from 87.5mm > 350mm wide and 31.25mm thick
  • BS EN 795 Class B

Adjustable Width I-Beam Trolley Anchor Designed to move along horizontal beams with an attached fall arrest system, fall arrest block, lanyard or vertical running line etc.

  • Moving anchorage point for beams from 76 > 203mm wide and 17mm thick
  • Can be attached at any point of a beam
  • BS EN 795 Class B